Endlich ist mein Sockel 775 System lauffähig. Ich habe jetzt Windows 7 inststalliert und bin gerade dabei mich mit dem neuen Betriebssystem anzufreunden. Eigentlich wollte ich die CPU gleich auf 3,6Ghz bringen.
Aber das Bios meines Mainboard hat es in sich. Ich sehe kein Land und habe absolut keine Ahnung was ich da im Bios eigentlich so einstelle. Kann mir jemand helfen die CPU erstmal auf FSB 400 und somit 3600 Mhz zu bringen? Bei meinem alten P4C800 waren die Bios Optionen noch eindeutig und verständlich. Beim Rampage Extreme verstehe ich nur Bahnhof...
System siehe Im Aufbau Signatur...
Intel E4300
Corsair H50 Kompaktwakü
Asus Rampage Extreme (X48)
Corsair DDR3 2x2GB PC3-16000U CL9-10-9-27 (DDR3-2000) (hat XMP Profil)
625 Watt Netzteil
Das was ich momentan ereicht habe:
CPUZ Validation
Mögliche Bios Einstellungen:
Code: Select all
Ai Overclock Tuner [Manual]
FSB Frequency [300]
CPU Ratio Setting [Auto]
CPU Clock Skrew [Auto]
NB Clock Skrew [Auto]
FSB Strap to North Bridge [Auto]
PCIE Frequency [100]
DRAM Frequency [Auto]
DRAM Command Rate [Auto]
DRAM Timing Control [Auto]
DRAM Static Read Control [Auto]
DRAM Dynamic Read Control [Auto]
Ai Clock Twister [Auto]
AI Transaction Booster [Auto]
-----------------------------------------------------------------
EPU II Phase Control [Auto]
CPU Voltage [1,4]
Loadline Calibration [Auto]
CPU PLL Voltage [Auto]
FSB Termination Voltage [Auto]
CPU GTLVref(0) [Auto]
CPU GTLVref(1) [Auto]
CPU GTLVref(2) [Auto]
CPU GTLVref(3) [Auto]
NB GTLVref [Auto]
North Bridge Voltage [Auto]
DRAM Voltage [1,65]
NB DDRVref [Auto]
DDR3 Channel A REF Voltage [Auto]
DDR3 Channel B REF Voltage [Auto]
SB 1.5V Voltage [Auto]
SB 1.05V Voltage [Auto]
CPU Spread Spectrum [Auto]
PCIE Spread Spectrum [Auto]